Dodge Challenger SRT-8 The company CCG Automotive located in Monschau at the extreme western end of the Federal Republic of Germany specializes in wrapping of all types. High grade car wrapping (full and partial wrapping) is offered by CCG much like inscription on utility vehicles as well as film-coating for paint and stone chip protection.
CCG Automotive also devoted its attention to the interior in its beautification efforts. Previously hard and seemingly less sophisticated plastic surfaces, seats as well as the dashboard and headliner were partially neatly stitched and refined with soft Alcantara and pleasant smooth leather in anthracite/black. Red seams and edge framing clearly emphasize colors. The factory-installed MyGIG hard disk audio system with Radio, CD/DVD player and Touch screen as well as the SRT Option Package II with 13 Kicker SRT high-performance loudspeakers, a 322-watt Kicker SRT amplifier and a 200-watt Kicker SRT subwoofer provide first-class Hi-Fi sound on board.
Of course, the CCG Challenger even has far more to offer than being “just” one extravagant wrapping. For instance, the 6.1 liter V8 of the SRT8 top model, which in serial production, already has a strength of 431 Horse Power – and is by no means a weakling – was sent packing from the large engine compartment. It had to make way for a formidable 7.0 liter Stroker HEMI-V8, which develops a massive 600 Horse Power and torments the drive line with some powerful 638 Newton-meter torque.
Upon every burst of acceleration, the axle back exhaust produced in our factory with two square exhaust-pipe-ends, releases a characteristic and unmistakable thunderous sound. Pushed to full performance limit, the speedometer pointer of the Challenger will move almost effortlessly beyond the 300 km/h end-marking of the speedometer. The fact that Dodge can still be driven as a relatively economic and affordable vehicle in spite of this powerhouse buried beneath the long engine hood and in times of skyrocketing gas prices is attributable to the installed PRINS Liquefied Petroleum Gas facility with two carburetors and a 120-liter tank.
It is a matter of course that a high-powered automobile like the Challenger also requires an adequate wheel tire combination. CCG Automotive combined the three-part Asanti of the sizes 9×22 and 10×22 inches, painted in black, with Pirelli Scorpion Zero Rollers of the dimensions 265/35R22 on the steering axle and 295/30R22 on the drive axle. To facilitate the successful installation of this combination in the wheel wells, they had to be discreetly widened. LSD doors allow the large doors to swing skywards.
Thanks for taking the time to share this excellent post on this Dodge Challenger SRT-8. These are so really cool photos and I really like the wonderful paint job from the photos. Have a great rest of your day.
ReplyDeleteGreg Prosmushkin